Home / Sewing Machines / Pattern & Template Machines
SAFE · Select by operation
Pattern & Template Sewing Machines
Choose an electronic pattern or template sewing machine around the complete sewing path and the way the workpiece is held. Compare sewing areas, head movement and catalogue specifications before discussing a fixture or template.
Model comparison
Find the right starting point.
Compare these catalogue specifications, then open a model for full technical data. Final configuration is confirmed with your quotation.
| Model | Listed sewing area | Machine arrangement | Selection point |
|---|---|---|---|
| SF-2010 | 200 × 100 mm | Electronic pattern sewing | Small components and repeat patterns with an appropriate fixture |
| SF-6040 | 600 × 400 mm | Electronic pattern sewing | Bag and garment patterns; 550 W AC servo main motor |
| SF-13090S | 1,300 × 900 mm | Rotating head with head lift | 360° rotation; maximum head lift 50 mm |
| SF-13090X | 1,300 × 900 mm | Rotating-head template sewing | Head lifting is not provided in the listed configuration |
| SF-13090T | 1,300 × 900 mm | Large-area template sewing | General garment template configuration |
| SF-3020 | 300 × 200 mm | Electronic pattern sewing | Pneumatic clamp; 550 W AC servo main motor |
Sewing performance depends on material, thread, needle, settings and handling. Send the required seam or component for application review.
Work area, fixture & material
Make the workpiece the starting point.
A programmable pattern sewing machine follows a prepared stitch path while a fixture or template holds the work. Select the field using the entire path and the workholding arrangement, not only the finished part dimensions.
| Check | Why it matters | What to supply |
|---|---|---|
| Stitch path and field | SF-2010 lists 200 × 100 mm, SF-3020 300 × 200 mm, and SF-6040 600 × 400 mm. The 13090 template range lists 1,300 × 900 mm. | A dimensioned drawing showing the complete stitched area and the intended orientation. |
| Fixture and loading | A part that fits the field still needs secure holding, needle access and room to load and remove it. | Material layers, component photos, clamping points, and an existing fixture or template drawing if available. |
| Motion and head configuration | SF-6040 uses an AC servo main motor with X/Y stepper drive. SF-13090S and SF-13090X use rotating-head arrangements; lifting details differ. | The operation and handling sequence, including curves, corners and any head-lift need. |
| Material and utilities | Needle, thread, clamp and operating conditions must be matched to the task. | Fabric/leather/webbing sample as relevant, thickness and layers, seam specification, electrical supply and available compressed air. |
Agree the sample criteria before selecting a machine.
State the seam position, stitch length, appearance and handling requirements to check. Request a test with the actual material and fixture, and record the settings used. A larger field or higher maximum speed alone does not prove suitability or production output.
SF-6040 field and drive detailsFor decorative embroidery, compare embroidery machinesPrepare your machine enquiry
Selection information reviewed . Confirm the supplied configuration in your written quotation.
Explore specifications
View the SAFE models.
Pattern Sewing
SF-3020
300 × 200 mm Electronic Pattern Sewing Machine
Repeated lockstitch shapes on components that fit within the sewing field.
Before you choose
Questions about this range.
Is a pattern sewing machine the same as an embroidery machine?
They are separate product selections in this catalogue. These pattern and template models use a single-needle lockstitch for programmed sewing paths. For caps, garments and decorative embroidery, review SF-CT1201S and its frame and needle-count options.
What should I send for a template or fixture review?
Send the part drawing with dimensions, stitch path, material stack, required thread and seam result, plus a short description or video of the current loading process. State the target operation and available utilities; the final configuration is confirmed in the quotation.
Explore other operations
Browse sewing machine categories.
Browse the SAFE sewing machine range · Download the SAFE catalogue · Spare parts and technical support
Plan your next machine
Tell us what you need to sew.
Send your material, seam or component drawing, quantity and destination to Trentzhou. Orders start from one machine, with a one-year warranty, spare parts supply and remote technical support.
SAFE buying resources
Guides for your next decision
Compare the specification, application and quotation before you choose.
Choosing a Pattern Sewing Machine: Work Area, Fixture and Material
Compare SAFE SF-2010, SF-3020 and SF-6040 work areas. Check stitch paths, fixtures, material layers and drive configuration before requesting a machine quote.
Read the Guide ↗